Comments on: Most Common Fence Questions https://blog.kencove.com/most-common-fence-questions/ Electric Fence, High Tensile Fencing Supplies Fri, 01 Mar 2019 18:01:45 +0000 hourly 1 https://wordpress.org/?v=4.9.6 By: Mike https://blog.kencove.com/most-common-fence-questions/comment-page-1/#comment-191620 Tue, 20 Dec 2016 18:36:41 +0000 http://blog.kencove.com/?p=1622#comment-191620 I have kencove model ek9h can I run it bipolar

]]>
By: Kencove https://blog.kencove.com/most-common-fence-questions/comment-page-1/#comment-190994 Mon, 07 Nov 2016 14:33:52 +0000 http://blog.kencove.com/?p=1622#comment-190994 Without your charger hooked up to anything what is the voltage reading on your KF13000? Disconnect the ground lead out wire and you should read between 6,000-10,000 volts. If you are not reading a voltage in this range than your energizer should be sent in for repair. You can send it in to our Blairsville location. Place a note with your name, phone number, and brief description of your energizers issues in a box addressed to Kencove Att Dean 344 Kendall Rd Blairsville, PA 15717. If you have any questions give our product specialists a call at 1-800-KENCOVE

]]>
By: EDurbin https://blog.kencove.com/most-common-fence-questions/comment-page-1/#comment-190985 Sun, 06 Nov 2016 22:44:37 +0000 http://blog.kencove.com/?p=1622#comment-190985 My Kencove KF13000 was working fine the last 6 months. Now with charger not connected to fence the ground light on front of charger flashes red (when power switch is on FULL power.) Fence light flashes green. If I switch to half power
the lights vary. Sometime fence is green and ground red, sometimes, both red, sometimes ground is green and fence is red. Is this charger broken? I connected another charger I had for a smaller pasture. It doesn’t have test lights, but everywhere I test the fence with the smaller charger, the fence is showing 5-6,000 volts. I walked the fence (8-9 acres) and didn’t find any obvious shorts. I’d appreciate ideas. Thanks.

]]>