Videos

Product Video Resources

2 Slot Crimp Tool
The TZ3 is easy to use and designed to cut, crimp, and strip all common fence wires. The hardened cutter is built right into the nose. The small stripper hole strips insulated or coated wire products without damaging the galvanizing of the wire coating. The smaller crimp slot is for crimping 16ga to 12.5 ga wire, and the larger crimp slot is for crimping barbed wire and open taps.
Video

 

4-Tier Spinning Jenny
How to use the 4-Tier Spinning Jenny to dispense multiple coils of fence wire.
Video

 

Bekaert: 2×4 Horse Fence
Installation advice for installing 2 x 4 Horse Fence.
Video

 

Bekaert: Barbed Wire
Installing Barbed Wire Fence by Bekaert.
Video

 

Bekaert: Fixed Knot
A primer for the installation of Fixed Knot Fence.
Video

 

Bekaert: Hinge Joint
A primer for the installation of Hinge Joint Fence.
Video

 

Bekaert: Installing High-Tensile Smooth Wire
Basic installation tips for high-tensile smooth wire.
Video

 

Bekaert: Introduction
Fence building tips by Bekaert Wire.
Video

 

Bekaert: Testing
See the difference in breaking strength between high tensile wire and low carbon wire.
Video

 

Brace pins
Well-constructed braces are essential to high-tensile fencing. See how brace pins are used in building a horizontal brace assembly.
Video

 

Cutout Switches
Video

 

Electric Fence Signs
Video

 

Geared Wire Twist Tool
Video

 

Gripple T-Clip
Video

 

H-Brace Hardware Kit
Video

 

Horserail Installation
Learn how to install Horserail Buckles.
Video

 

Horserail Spooler Tensioning
How to tension Horserail using Spoolers and Handle Set.
Video

 

How to Dismantle Kencove Electric Netting
This video illustrates how to uninstall Kencove Electric Netting with little time or effort.
Video

 

How to Drive a T-Post with T-MATE (TPDP)
Drive or remove posts quickly and easily with the heavy duty T-Post Driver/Puller. You’ll never need to use a ladder to drive a tall t-post again.
Video

 

How to Electrify Electric Netting
Adding zap to a Kencove Electric Netting system is simple! This easy-to-follow video demonstrates proper grounding and installation of the Stafix .5 Joule Solar Energizer for all Kencove electric netting systems.
Video

 

How to install a Corner Collar Insulator
This short clip shows how easy it is to install a Cornar Collar Insulator.
Video

 

How to Install a Tension Spring
When the spring is compressed to the first notch in the drawbars, it is under 150 pounds tension, which is common for electric style fences. When the second notch is exposed, there is about 250 pounds of tension on the fence.
Video

 

How to Install Electric Netting
Portable and practical, Kencove Electric Netting is an optimal solution for portable fencing. This video tutorial demonstrates the basic steps of electric net installation and will help you get it into the pasture in no time.
Video

 

How to Install the (ITE) T-Post Insulator
This insulator handles larger diameter fences like Hotcote, and installation is literally a snap.
Video

 

How to Remove Knot from Solidlock Woven Wire
This video demonstrates how to splice or terminate woven wire by removing the fixed knot. Knipex Wire Cutter with angled head removes knots without fuss.
Video

 

How to Use a Wire Twist Tool (TWTL)
While measuring only a few inches in length, the Wire Twist Tool is a huge help when bending and splicing in tight spaces.
Video

 

How to Use the Kencove Digital Voltmeter
Fence not so hot? See how to test the voltage on your electric fence or net in two easy steps with this voltmeter.
Video

 

Insulated Wire Strainer
Video

 

Kencove Nitro Post Driver
Designed for durability, safety, and ease of operation, the Kencove Nitro surprised even the experts. The Nitro works by hydraulically compressing nitrogen gas, transferring the energy directly to the hammer head, a revolutionary technology in the fence industry. It is safe, easy to use, and reliable. The Nitro is available in two models. For more info or to buy the Nitro 750, click here. For more info or to buy the nitro 1000, click here. Music provided by https://www.freesfx.co.uk
Video

 

Kencove Post Drivers
Kencove post drivers are made in the USA. They are reliable, affordable, and powerful. The PD100 model handles large diameter posts and produces an impact of 71,500 pounds at full stroke. The PD80 provides an impact of 30,000 pounds at full stroke. Both models offer 15-degree movement side to side and forward and back. They come complete with 3-point hitch and secure stand base.
Video

 

Kiwi Post Driver, Skid Steer Mount
The Kiwi Skid Steer Post Driver is powerful and agile, combining 120,000 pounds of post driving force with high degrees of tilt to drive posts in all kinds of terrain. See all the features and functions of the skid steer unit in this 5-minute video.
Video

 

Kiwi Skid Steer Self-Contained Post Driver
This Kiwi driver offers great power and versatility and eliminates the possibility of hydraulic fluid contamination.
Video

 

Kiwi Tractor Mount Side-Slide Post Driver
This Kiwi Post Driver model is self-contained to prevent cross-contamination of fluids and has a 42″ side shift.
Video

 

Kiwi Truck Mounted Post Driver (part 1)
The ultimate post driver for a crew of fence builders! Outfitted on a Ford F-350 truck, this unit combines the usual power and dependability of the Kiwi post driver with the muscle and hauling capacity of a one-ton truck. Lug your crew, tools and post driver down the fence line all at once. See all the key features of this unit in this segment.
Video

 

Kiwi Truck Mounted Post Driver (part 2)
See the features and functions of the truck mounted post driver’s valve bank and beam and witness the relative ease of driving posts.
Video

 

Kiwi Wire Strainer with Quik-End
How to install the Kiwi Strainer with Quik-End
Video

 

Lightning Diverter Set Up
A brief explanation of how an electric fence lightning diverter works
Video

 

Little Mighty Man T-Post Puller
With a unique spring-loaded lock system, this tool can pull t-posts out straight and undamaged in seconds. The puller can be used with a front-end loader or 3-point hitch. Simply place the puller on the t-post, and secure a hook or clamp around the arch of the puller. If you plan to pull a lot of t-posts, get this rugged, easy to use t-post puller.
Video

 

Megaflow Jobe Valves
Built for underwater mounting in high flow situations, the Megaflow utilizes a float attached with a nylon cord to fill troughs and tanks to the appropriate level. In addition, the Megaflow’s Detach feature makes for easy positioning of the valve.
Video

 

Multi-Function Fencing Tool
How to use the Kencove Multi-Function Fencing Tool (TEC)
Video

 

Original Kiwi Strainer
This KIWI wire strainer has a spring to hold the latch flipper tight against the cog spool, which makes tightening the wire safer.
Video

 

PasturePro Dropper Installation
PasturePro Droppers are easy to install with the 1″ dropper clip.
Video

 

PasturePro Post – Bale Test Video

 

Pilot Driver
Video

 

Positive/Negative Electric Netting Explained
Positive-Negative Electric Netting is the optimal portable fencing solution for dry areas or locations with poor grounding conditions. The video explains how this system works to control livestock.
Video

 

Quick Brace Installation
How to install a 12ft Quick-Brace
Video

 

Quick Ground Rod (MGQ)
The Quick Ground Rod (MGQ) is a hot-dip galvanized ground rod with an attached driver. It makes easy work of driving ground rods for portable fences. It is 30″ long by 1/2″ diameter.
Video

 

Rojo Water Valves
Thanks to its innovative multi-angle float system and versatile mounting options, the Rojo provides easy automatic filling of troughs and tanks. The Rojo is suitable in low-flow situations and can be mounted above or below the water line.
Video

 

Safety-Loop Connector
How to install the Safety-Loop Connector
Video

 

Shaver HD10/PD10 Hydraulic Post Driver
When posts get larger and driving more difficult, the PD10 provides 71,500 pounds of impact, 15 degrees of tilt in four directions and up to 8.75″ diameter post handling capability.
Video

 

Shaver HD10H/PD10H Hydraulic Post Driver
The Shaver HD10H/PD10H Hydraulic Post Driver is fast and powerful.
Video

 

Shaver HD12/PD12 Hydraulic Post Driver
A time and money saving solution for the professional fence contractor or high volume user, the PD12 boasts 100,000 pounds of impact, the capacity to take on the largest posts (and even railroad ties) and 20 degree side-to-side/25 degree front-and-back hydraulic tilt.
Video

 

Shaver HD8/PD8 Hydraulic Post Driver
With 30,000 pounds of impact, 15 degrees hydraulic tilt in four directions and the ability to drive posts up to 7 1&fras;8″ in diameter, the PD8 is the logical choice for farmers looking to expand their fence line in the shortest amount of time.
Video

 

Shaver HD8H/PD8H Hydraulic Post Driver
With 30,000 pounds of impact, 15 degrees hydraulic tilt in four directions and the ability to drive posts up to 7 1&fras;8″ in diameter, the PD8 is the logical choice for farmers looking to expand their fence line in the shortest amount of time.
Video

 

Solar Dolly with Electric Netting
The portability of the Solar Dolly is a perfect match for the portability of Electric Netting! See how to connect solar fence components for easy electrification of a net fence.
Video

 

Solar Panel Energizer Installation
Video

 

Spinning Jenny
Using a Spinning Jenny to dispense high-tensile wire reduces the likelihood of tangles and personal injury. See how this simple device makes for safer and speedier payout of wire.
Video

 

Stafix Solar Energizer EXS.5
How to install the SXS Solar Energizer with electric netting.
Video

 

T-Post Insulators
Video

 

The Spiralator Video
Video

 

Topaz Water Valves
Like its namesake, the Topaz valve is a gem for anyone looking for an easy-to-use, cost-effective watering system. The high-flow, compact and non-corrosive Topaz can be mounted above or below the waterline and is equipped with the Detach feature for easy attachment and removal even with the water still flowing.
Video

 

Tube Insulators
Electrification of high-tensile wire is made easy with fin tube insulators. Simply slide the required amount of insulators down the wire and staple to the line posts.
Video

 

Underground Wire
Electric fences going beyond a gate need an underground hot wire to keep the current flowing. Learn how to properly bury insulated wire for ideal electrification around gates.
Video

 

Vector Post Driver – Excavator Model
Versatility is the defining feature of the Vector Mini-Excavator Post Driver. An easy one-hose hydraulic hook-up to an excavator arm and 55,000 pounds of impact allows you drive posts up 16 feet tall over hedgerows, stream banks and everywhere else.
Video

 

Vector Post Driver – Model 3RS
See the Vector Model 3RS Rock Spike in action. The Rock Spike pounds through the toughest, rocky soils without the use of an auger.
Video

 

Vector Post Driver – Model 4
Designed with the fence contractor in mind, the Model 4 supplies 130,000 pounds of impact and high degrees of tilt for fast and accurate driving of posts. The included rock spike allows for posts to be driven in rock, clay and even concrete!
Video

 

Vector Post Driver Model 4 with tall beam
Watch the Model 4 with tall beam effortlessly drive a 14 ft post. Thanks to a rock spike and high degree of tilt and side shift, driving towering posts in rocky and hard soil is not such a tall order.
Video

 

Voltmeters/Fault Finders
Video

 

Wraparound Insulators
The perfect solution for insulating high-tensile wire around corner and end posts. An aluminum insert ensures the wire won’t cut through the plastic.
Video

 
 
 
 

This entry was posted in Videos. Bookmark the permalink. Follow any comments here with the RSS feed for this post. Post a comment or leave a trackback: Trackback URL.